Connecting The World To A Higher Standard™


FAQs for SFP28

Siemon Interconnection Solutions (SIS) Experts provide answers to Frequently Asked Questions about SFP28

What does SFP28 stand for?

SFP28 stands for Small Form-Factor Pluggable 28. It is the third generation of the SFP interconnect systems designed for 25G performance per the IEEE 802.3by specification (25GBASE-CR).

Can I use SFP28 cables in SFP+ ports?

Yes, SFP28 is backwards compatible with SFP+ ports and will work sufficiently. SFP+ cables can be plugged into SFP28 ports but they are not designed for 25Gb/s data rates.

What is the difference between SFP28 and SFP+?

The pinouts of SFP28 and SFP+ connectors are mating compatible. However, SFP+ is designed to operate at 10.3125 Gb/s whereas SFP28 is designed to operate at 25.78125 Gb/s. SFP28 has increased bandwidth, superior impedance control and less crosstalk than the SFP+ solution. Also, the SFP28 copper cable has significantly greater bandwidth and lower loss when compared to the SFP+ version.

What is your standard turnaround time for delivery for Siemon SFP28 Cable Assemblies?

We make every effort to keep standard lengths (0.5M, 1M, 1.5M, 2M, 2.5M, 3M, 4M, 5M) with black jackets in stock and available to ship within 24 hours. Other lengths and colors are available but require longer lead-times. Contact Siemon customer service for availability

What gauges and lengths does Siemon offer?

Siemon offers 30 AWG for 0.5m to 2m lengths and 26 AWG for 3m to 5m lengths. Standard lengths are 0.5m, 1m, 1.5m, 2m, 2.5m, 3m and 5m.

Do you offer custom EEPROM programming?

Yes, upon request. Cables with custom EEPROMs will be supplied under a different part number.

What product documentation do you offer?

Product specification sheets, customer use drawings, signal integrity reports and standard EEPROM programming table are available on our website.

Do these products support 25G per lane data rate and for what standards?

Yes, per SFF-8402, SFF-8419, SFF-8432, SFF-8472 and IEEE 802.3by, these cables support 25G Ethernet.

Do you have design qualification test data?

Siemon's performance testing exceeds industry requirements. Mechanical and electrical test data is available upon request.

What are the other key product attributes?

Due to our automated termination process, our cable assemblies exhibit best in class impedance and cross talk performance.

What cable jacket color is available?

Our standard jacket color is black. Red, white and blue are also available. Contact Siemon customer service for availability

Where do you manufacture these cables?

China. We inventory cables in several of our global manufacturing locations for regional supply. Contact Siemon customer service for additional information.

Where are these cable assemblies used?

These are "point-to-point" cables that are used to directly connect two pieces of active network equipment like switch-to-switch or switch-to-server applications They are most commonly used in data centers for ToR (top of rack) or MoR (middle of rack) switch applications.

What is IEEE 802.3bj and 802.3by and how do they differ?

These are Ethernet standards that govern 25 and 100G data transmissions. The IEEE 802.3bj specification was released in 2014 and it addresses 100Gb/s Ethernet data rates using 4 by 25Gb/s channels. It covers the QSFP28 form factor which looks the same as the 40Gb/s QSFP+. The IEEE 802.3by specification was released in June 2016 and it addresses 25Gb/s Ethernet data rates. It covers the SFP28 form factor which looks the same as the 10Gb/s SFP+. But it also includes the QSFP28 form factor and the QSFP28 to four SFP28 breakout cables.

One major difference between the cables used for the "bj" spec and the "by" spec is that the "bj" only recognizes one FEC (forward error correction) mode of operation whereas the "by" specification recognizes three different FEC modes. These are designated as long, short and no FEC. Typically long would be required for cables longer than 3 meters, short for cables 3 meters long and no FEC for cables shorter than 3 meters. However, the designation depends on the performance of the cable and can vary depending on the cable design.

Are Siemon SFP+ cables returnable?

Standard lengths are returnable within 90 days. Non-standard lengths are not returnable.

* The information provided is accurate to the best of our knowledge.

Contact Siemon Interconnect Solutions Technical Support for additional assistance.



Need Help?

Ask SIS

Email:
SIS Customer Service
SIS Sales

Customer Service:
1-860-945-4213
   (8AM to 5PM EST)
Sales:
1-860-945-5856
Technical Support:
1-860-945-4390

Follow SIS

eNewsletter Signup

Sign up to receive the latest SIS product news and information.

×
×